-------------------- Speedring/Adapter Louver & Barn doors Mask Manual of Softbox Manual of Barn doors

 1. Name of parts of 3way Barn Doors

 2. How to assembly supporting rod and doors

Place each door and rod as above fix and

fasten volts, nuts into the holes of supporting

rod doors as fig #1

※ Caution : As to BDF810, ⓒdoor should be assembled the same as above(ⓒ is smaller thenⓐ, ⓑ)

※ Please assembly the edge of rods as to
    90° to the ground as fig #2.

    (Parts of assembled softbox and doors     should be as to 45°to the front)

 3. How to assembly softbox and doors

Please insert and fasten the volts into the holes on the edge of softbox.

 4. How to assembly doors and reflection panel

Put the pannel edges on the edge of door.    Both sides of pannel are available.

 5. After assembly