| |
Transmitter, Receiver, Individual integrated AC power adapter with PC male for the Receiver, Multi-use pole mounting strap, Sync Cord mini to 6.3mm jack coiled for studio flash unit, Sub-mini to PC sync cord for the camera without hot shoe, User guide.
(!) No battery included : User must buy 3 rechargeable batteries(AAA).
|
|
| |
- The first & only one Radio Slave in Korea that has been registered and approved by Korean Ministry of Information and Communication Radio Research Laboratory.
- 6 Independent Channels : My Slave-60 has six unique Channel Codes. My Slave-60 units set to one Channel can¡¯t activate My Slave-60 set to different channels. You can control the Channel Code to make My Slave-60 units work together or independently. My Slave-60 works with almost every strobe or flash lights such as Mets, PowerPack, Elicrome(different sync cord provided), Monolights and other branded lightings.
- My Slave-60 Set provides a coded radio signal that works indoors, outdoors, around corners and through walls. Line of sight is not required between Transmitter and Receiver.
- Works with AAA battery, rechargeable battery as well as both of 110V/220V AC current (Auto-converted).
- My Slave-60 also can reduce certain damages onto the digital camera itself or its circuitry, caused by accident or overheating by high voltage while using camera for many hours. This important fact has been proved by a great number of My Slave-60 manias.
- Even while using, the rechargeable batteries put in Receiver can be recharged by the AC power cable with PC male (included)
- Compact sizes. (especially Receiver : 3 x 2 x 0.8 ¡° (7.5 x 5 x 2 cm) except antenna)
- Test button on the Transmitter assures user all flash heads are working.
|
|
Consists of
